True or False
6. Substitute pliers for a wrench when turning bolts and nuts
7. Use screwdrivers as a pry bar, chisel, and punch stirrer or scraper.
8. Never leave a knife unattended with the blade exposed.
9. Cut hardened wires only with pliers designed for that purpose.
10. Always cut the wires at the right angle. Never rock from side to side or bend the wire back and forth against the cutting edges.
11. Don’t bend or apply side loads to blades by using them to open cans or loosen the tight cover of containers.
12. Don’t bend or apply side loads to blades by using them to open cans or loosen the tight cover of containers.
13. Never use pliers as a hammer on the handle.
14. Replace the blade when it starts to "tear” instead of cut.
15. Only use wrench or screwdrivers specifically designed for a purpose.
