Multiple Choices: Read each statement carefully. Then, write the letter of the correct answer in your answer sheet. 1. What is the purpose of turning the drill on before attempting to drill a hole a. see if the drill operates. b. see if the drill bit is running true. c. make sure the chuck key has been removed d. check if the power cord is good 2. The purpose of moving the drill and the bit up and down often while drilling deep holes is to a. ream the hole slightly larger. b. give the drill operator better drilling leverage. c. help keep the hole centered. d. reduce overheating in the drill bit. 3. What will likely happen if a large capacity portable drill bit jams during the drilling operation? a. The bit will break. b. The drill will rotate in the opposite direction to the bit causing injury to the user's wrist. C. The drill will likely stall out and overheat. d. The hole will become badly distorted. 4. What kind of pressure should be applied to a drill during the drilling operation? a. Light, even C. Moderate, even b. Medium, even d. Heavy, even 5. What type of drill speed is needed for wood drilling operation? a. Low c. Medium b. Low-medium d. High 6. What type of drill speed is needed for most metal drilling operations? a. Low c. Medium-high b. Medium-low d. High​