1. Any piece of computer hardware that displays results after the computer has processed the input data that has been entered.

a. Input Device
b. Output Device
c. Hardware

2. CRT means

a. Cathode Ray Tubes
b. Cathode Rey Tub
c. Catode Ray Tubes

3. Which tool is used for hardware to stand on to prevent static electricity from building up?

a. Anti-static mat
b. Philips head screwdriver
c. Hex driver
d. Wire cutter

4. Which tool is used to loosen or tighten cross-head screws?

a. Anti-static mat
b. Philips head screwdriver
c. Hex driver
d. Wire cutter

5. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws?

a. Anti-static mat
b. Philips head screwdriver
c. Hex driver
d. Wire cutter

6. Which tool is used to strip and cut wires?

a. Anti-static mat
b. Philips head screwdriver
c. Hex driver
d. Wire cutter

7. Which tool is used to retrieve parts from location that are too small for your hand to fit?

a. Part Retriever
b. Cable ties
c. Lint-free Cloth
d. Flat head screwdriver

8. Which tool is used to clean different computer components without scratching or leaving debris?

a. Part Retriever
b. Cable ties
c. Lint-free Cloth
d. Flat head screwdriver

9. Which tool is used to bundle cables neatly inside and outside of a computer?

a. Part Retriever
b. Cable ties
c. Lint-free Cloth
d. Flat head screwdriver

10. Which tool is used to loosen or tighten slotted screws?

a. Part Retriever
b. Cable ties
c. Lint-free Cloth
d. Flat head screwdriver

11. Which tool is used to loosen tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop?

a. Anti-static mat
b. Philips head screwdriver
c. Torx screwdriver
d. Wire

12. Which tool is used to blow away dust and debris from different computer parts without touching the components?

a. Anti-static mat
b. Compressed air
c. Hex driver
d. Wire cutter​